RZR-05420


Weld on Gusset kit to Strengthen Frame Mounting points 

For preventative maintenance or Repair 

Made out of HCR Custom alloy 30 % Stronger than chromoly 




1. This is the Upper Front A-arm Tab (This is 1 of 2 tabs on the gusset kit, pay attention to placement as the hole on the gusset piece is not centered)



2. This is the Upper Front A-arm rear Tab. (This tab is 1 of 2 on the gusset kit, mostly square with a corner rounded off)


3. This is the Lower Rear  A-arm Tabs, 1 for the front side and 1 for the rear side. (This is 1 of 4 on the gusset kit, mostly square with one side having the frame tube cutout)



4. This is the Lower Front A-arm Front Tab. (This is the Lower Front A-arm Tab. (This is 1 of 6 square tabs found on the gusset kit)


5. This is the Lower Front A-arm Rear tab. (This is 1 of 2 pieces on the gusset kit, piece has one angled cut with the tube frame cutout on one side)


Installing this kit to this point on both sides you will have used 12 pieces of the Gusset Kit, extra pieces can be used as needed. 

NOTE: You can use the 2 Tabs shown in the picture below to be used on the outside face of the Trailing Arm frame mount. 




Write a review

Note: HTML is not translated!
    Bad           Good

Polaris XP 1000 Gusset Kit

  • Product Code: RZR-05420
  • Availability: In Stock
  • $80.00


Available Options