YXZ-02600 YXZ Elite Long Travel Kit
HCR Racing is proud to introduce the +4 YXZ Complete Long Travel Suspension System to it’s product portfolio. Following the style and strength of HCR’s recent releases, with a modern edge.
HCR's proprietary billet, slot and tab design and honeycomb boxed arms are built to withstand the beatings of rigorous off-road riding which achieving the optimal combination of strength and appeal. Every external weld is an internal plate structured into the design. While the cost-effective approach is to run tube ends for ball joints , all HCR kits run a 4130 heat treated billet end allowing all internal and external plating to be attached to this billet eliminating a potential weak point. Billets are available in both balljoint and spherical applications.
Feel confident in the most demanding terrain with King 2.5 HCR Race Series Shocks with Internal Bypass technology in the rear shocks and available as an upgraded option for the front shocks. The shocks provided with this complete system are longer eye to eye, stroke, and custom valved specifically for the geometry of the YXZ system. By providing a shock tower and Longer shocks, HCR has achieved optimum performance without compromising motion ratio, minimized shock fatigue, and less compound leverage on the arm preventing further bottoming and damage to components. Included with System are King 2.5 HCR Race series shocks; sprung , valved, and tested by the owner of King himself. These true off-road shocks have the larger internals than competitors advertised 3.0’s, allowing minimal weight added without compromising performance. Backed by King, HCR provides a 3 Month tuning opportunity to meet with King technician for a live session if a different valving option is preferred.
Customized Shock Package
for the rear, internal bypass shocks with finned remote reservoirs are included standard with every kit. This needle valve technology can be setup with light valving at ride height to deliver a smooth comfortable ride while still providing substantial damping force at full compression preventing bottoming out during hard use. Front shocks are 12" stroke piggy backs with a soft initial hit and flutter stacks for high speed. Proper springs are provided to still allow full articulation of all 21" of travel in both high and low speed situations. These shocks also come standard with billet compression adjusters which allow for 30% adjustment range with a click of a dial.
IBP Front Upgrade
Intended for the Aggressive Duners, Racers, and those who like to push it that much harder. This upgrade extends the same internal bypass technology included in the rear shocks to all 4 corners. This patented needle-valve design allows for less bottoming and shock fatigue on square edges, G outs, long distance racing, jumping, etc. where the front end needs a little more. While a little more harsh on initial deflection, these IBP's get pushed, the smoother the ride.
3.0 Rear IBP Upgrade
Reminder: HCR shocks are Full Offroad Shocks, not UTV shocks. An HCR Race Series King 2.5 has a larger piston and internals than a standard 3.0 UTV shock. This will also add and additional 16lbs per corner. 3.0 shocks should only be considered in BITD/ SCORE/ Long Distance Race application.
A shock tower is included with every Yamaha YXZ Long Travel Kit. This reduces the amount of compound leverage to achieve a closer to 1:1 motion ration for less shock fatigue. This allows for better valving and lighter spring rates. Chromoly CNC'd suspension mounting points and a bolt on shock tower increase the strength and integrity of the stock chassis.
ADDED WHEEL BASE
The track width has been increased by 4 inches on either side, with a 4 inch longer wheelbase, 2 inches forward and 2 inches back, for added travel and stability. 1.25 inches additional clearance has also been added to all arms for added ground clearance.
RCV extended axle bars are included with the purchase of each kit. These 4340 Chromoly axles boast twice the strength of a stock axle and produce the highest torque test numbers of any aftermarket UTV axle. RCV also offers Tip to Tip assemblies for the HCR Long Travel kit as an upgrade.these complete half shaft replacements are designed as a hybrid between a convention UTV plunging CV axle still and RCV patented "bootless" technology. Proven to be almost 3X stronger than factory Components. Both shafts and completes are 100% manufactured and assembled in the USA.
The engineers at HCR were able to produce incredible numbers on the XXZ Kit. At 20 inches front and 21inches of rear travel and 4 inches of additional wheel base; the suspension has been completely redesigned. The extensive time in R&D allowed increased travel numbers without interfering with critical characteristics such as bump steer; adding less then 0.3º of change from factory. Caster / Camber settings have been embedded into the design of the Suspension eliminating the need for an adjustment heim, which reduces internal structure of the arm and presents a weak point upon impact. Impressively, HCR achieved a minuscule 0.06º change in caster / camber throughout the front Travel Cycle and 0.00º fluctuations throughout the rear travel cycle.
HCR uses the same custom alloy as their popular Elite kit to manufacture the Yamaha YXZ Kit. This proprietary material boasts 30% stronger tensile and yield strength compared to 4130 series chromoly. The material goes through several processes and is hardened for better wear resistance and overall strength.
Usable Travel : Over 20 front & Over 21” Rear Travel
+4 inches wider per side; Additional 8 inches of track width
+4 inches of wheel base added ; 2 front , 2 rear
minimal weight increase of only 13 pounds on Elite kit while increasing strength exponentially.
Fiber Laser Cut construction for precise fit and finish
CNC'd 4130 heat treated billet mounting points for increased integrity
Angled catacomb design for optimal force distribution
RCV +4 extended axle bars. Heat Treated & through hardened
Custom King 2.5 HCR race Series Shocks Off -road shocks
Unique trailing arm inspired design for minimal added weight and increased strength.
High Clearance Boxed A-Arm Design
Each piece is carefully tig welded for strength and aesthetics
OEM ball joints are reused to maximize low speed steering, ease & smooth travel with less maintenance
Uniball Option available for racing & short course application
FK bearing used for all included heims
compatible with stock wheels
High-Clearance Arms provide an increase of 1.25” in ground clearance
100% Bolt-on installation using factory mounting points
Larger front tube mounts are 1.25” in diameter with Delrin bushings for increased strength and durability
An iterative process is used during each design to simulate and refine the new geometry to match the characteristics of the stock suspension while increasing suspension travel. Critical measurements are verified, such as ball joint angle, CV joint angle, and clearance to surrounding parts to ensure no binding or interference.
The quality fit and finish, ease of installation, and top shelf performance of these kits are what sets HCR Racing apart from the competition. No kits are released to the public without numerous hours of vigorous testing in the rocks, desert, and dunes for true dual sport application.
All kits run 3-5 week production time upon deposit and are custom built to order. For current lead times or if you are trying to make an event, please call 435-865-9280 and we will accommodate best possible.