RZR-05200

DESIGN 

The same proven strength and engineering from HCR’s Pro kit has been re-designed for Sand and Dune Enthusiasts . The alloy used to manufacture the Elite kit is 30% stronger in tensile and yield strength compared to 4130 Series chromoly. The material endures several processes and is hardened for better wear resistance and overall strength. Following the design of HCR’s proven Pro Kit, the re-designed elite series has been created for the serious dune who wants the performance of a long travel kit without the weight. This new proprietary design lightens the product without compromise . Every external weld is an internal plate structured into the design. While the cost-effective approach is to run tube ends for ball joints , all HCR kits run a 4130 heat treated billet end allowing all internal and external plating to be attached to this billet eliminating a potential weak point. Billets are available in both balljoint and spherical applications. 



ADDED WHEEL BASE 

1 inch longer wheelbase for added travel and stability. 1.25 inches additional clearance has also been added to all arms for added ground clearance. 



FRONT SWAY BAR TABS 

Front sway bar tabs can be added at no charge during time of initial order. Great to work with Fox Edition XP1000 or Factory Turbo Models. This kit is also available for separate purchase if switching kit from older Unit to newer model; or would simply like to add on this feature. Compatible with Factory Sway bar tabs. Aftermarket Sway bar tabs will need to be addressed individually with the manufacturer.  




7/16 HD BACKPLATE UPGRADE 

Tired of losing your rear end to a bolt? Never again with this Heavy Duty Back Plate Setup. This double shear system with upgraded bolts eliminates horizontal movement due to lose / stretched bolts allowing the factory bolt to shear. 




7/16" ID Setup Includes: 


      • Back Plate with Larger 7/16" ID Bolt Holes 
      • Upper and Lower Brace tab to weld onto the Frame for double shear design
      • 7/16 ID F 911 Grade 9 Aircraft Bolts 
      • larger misalignment spacers or crush sleeves to use with larger diameter bolt
      • Please note factory bolt holes on frame will need to be drilled out to 7/16" ID to accommodate larger Setup. 
      • 7/16" Hardened washer are also recommended to weld on gusset factory frame holes (not provided)




FEATURES 

    • Laser Cut construction for precise fit and finish
    • CNC'd Chromoly mounting points for increased integrity
    • HCR Custom Alloy. Boasts 30% more strength than Chromoly
    • High Clearance Boxed Front A-Arm Design 1.250 added ground clearance
    • Each piece is Tig Welded by hand for strength and aesthetics
    • Re-use of OEM ball joints to maximize lowspeed steering ease & smooth travel with less maintenance
    • Revised Design for use of 2.5 shocks
    • High-Clearance Rear Trailing Arms provide an increase of 1.25” in ground clearance
    • 100% Proudly Made in the U.S.A
    • Bolt-on installation using factory mounting points
    • Heavy duty sway bar mount and hardware with 4130 Heims
    • 1" longer wheelbase for better high speed stability, hill climbing, and descents
    • Larger front tube mounts are 1.25” in diameter with Delrin bushings for increased strength and durability. Factory Crush sleeves re-used



minor relief cutting needed. See photos for details

All kits run 3-5 week production time upon deposit and are custom built to order. For current lead times or if you are trying to make an event, please call 435-865-9280 and we will accommodate best possible.




Write a review

Note: HTML is not translated!
    Bad           Good

Polaris RZR XP-1000 ELITE OEM Stock Replacement Kit

  • Product Code: RZR-05200
  • Availability: Pre-Order
  • $3,499.00


Available Options