Features: Large bore compression adjuster Billet aluminum T6 pistons Quick-adjust preload ring All-aluminum construction Hardened chrome-coated shafts Lightweight barrel springs PTFE-lined bearings Fully rebuildable seal head Built for Real‑World Riding Demands The stock suspension on the Can‑Am Defender HD10 does its job for casual...

PART# RZR-08500 Features: Adjustable Upper Control Arm Using 3/4 inch Heims To Allow For Control of Camber & Caster Constructed From HCR Alloy (30% Stronger Than 4130 Chromoly) Internally Gusseted and Braced Lower A-arms Gain 3” Of Ground Clearance OEM Geometry & Width Trailing...

Features: Front axle face-to-face length: 29.96” (extended), 28.07” (compressed) Rear axle face-to-face length: 29.84” (extended), 28.54” (compressed) Designed to work with our HCR Racing Mid-Travel Suspension Kit for the Can-Am Defender HD11 Made with end-to-end 4340 chromoly steel Designed with oversized CVs to operate...

Part #: RZR-05810Features: Adds 3” to each side Improves ground clearance by 1.25” HCR custom alloy boasts 30% more strength than chromoly TIG-welded by hand for strength and aesthetics Internal angled catacomb design for optimal force distribution Laser-cut construction for precise fit and finish...

Part #: RS1-05300-1HCR's proprietary billet, slot and tab design and honeycomb boxed arms are built to withstand the beatings of rigorous off-road riding which achieving the optimal combination of strength and appeal. Every external weld is an internal plate structured into the design. While the cost-effective...

Features: Black with red and white logo 80% ring-spun cotton; 20%polyester Black drawcord Tearaway tag for comfort HCR logo on front and back DescriptionWhen you live and breathe HCR suspension, you don’t just say it—you wear it. This HCR Hoodie represents the toughest suspension...

Part #: RS1-05300-2 FEATURES Laser Cut construction for precise fit and finish CNC'd Chromoly mounting points for increased integrity High clearance boxed front A-arm Design 1.250 added ground clearance Each piece is Tig Welded by hand for strength and aesthetics High-clearance rear trailing arms...

PART # YXZ-02600-STHCR Suspension's YXZ Duner Long-Travel Suspension SystemKit Features:  +4 inches wider per side; Additional 8 inches of track width +4 inches of wheel base added ; 2 front , 2 rear minimal weight increase of only 13 pounds on Elite kit while...

RZR-07300Features Laser cut construction for precise fit and finish CNC'd chromoly mounting points for increased integrity High-clearance boxed front A-arm design with 0.500" added ground clearance Each piece is Tig welded by hand for strength and aesthetics High-Clearance Rear Trailing Arms provide an increase of...

Features: Front axle face-to-face length: 31.02” (extended), 29.06” (compressed) Rear axle face-to-face length: 39.3” (extended), 29.29” (compressed) Made with end-to-end 4340 chromoly steel Designed with oversized CVs to operate at extreme angles 18-month warranty Replace your HCR Long-Travel Kit Axles with SuperATV’s Rhino 2.0 Axles...

  Part #: RZR-05200-1 Features: 1.75" longer wheelbase for better hill climbing, descents, and high-speed stability High-clearance boxed front A-arms and high-clearance rear trailing arms provide 1.25” of added ground clearance Front tube mounts are 1.25” in diameter—larger than stock—with Delrin bushings for increased...

Part#: MAV-05300-1 FEATURES Easy installation High-clearance A-arms Made out of HCR proprietary alloy—30% stronger than chromoly steel. Proudly made in the USA Improve your Can-Am Maverick X3 64” with HCR Racing Dual Sport OEM Replacement Front A-Arms. They are a direct replacement for your...

HCR kits are made to order. Quality takes time.PART# MAV-05200Features 1.5" High clearance A-Arm design allows for added ground clearance under key components.  Manufactured with HCR Elite Alloy; 30% stronger than 4130 Series Chromoly  Delrin bushings included for increased strength to mounting points.  Internal...

RZR-06200-1 Features Fiber Laser Cut construction for precise fit and finish CNC'd 4130 heat-treated billet mounting points for increased integrity Angeles catacomb design for optimal force distribution High Clearance Boxed A-arm Design Hand TIG welded for strength and aesthetics Compatible with factory wheels 100%...

Part #: RZR-05800Features: Adds 3” to each side Improves ground clearance by 1.25” HCR custom alloy boasts 30% more strength than chromoly TIG-welded by hand for strength and aesthetics Internal angled catacomb design for optimal force distribution Laser-cut construction for precise fit and finish...