Features Increased wheelbase for more clearance to run up to 28” tires. Increases width by +5” per side for 72” total width Laser-cut construction for precise fit and finish CNC'd Chromoly mounting points for increased integrity Each piece is TIG welded by hand for...

 PART# RAN-05421Looking to take your Polaris Ranger to the next level? Then look no further. The HCR Ranger long travel kit features a 10" wider stance to keep you stable and safe. 12.25" front travel and 14.25" rear travel to eat up obstacles, and...

PART # TAL-05400Features: Increases width to 72" Overall width will depend on tire and wheel combination Adds 3.3" to wheelbase for a total of 96” Suspension travel 17.7" front 20” rear with additional 1” wheel travel Adds 1.6” of clearance in the rear Adds...

Part # KAW-05400 Features 72" Width compared to 68" from factory Adds 10 pounds—roughly 2.5 lbs per corner Laser-cut construction for precise fit and finish CNC'd chromoly mounting points for increased integrity HCR custom alloy boasts 30% more strength than chromoly High-clearance boxed front...

PART# RAN-06400 Looking to take your Polaris Ranger XD to the next level? Then look no further. The HCR Ranger XD Mid travel kit features an 8" wider stance to keep you stable and safe on any trail. Up to 18" of ground clearance...

PART# XPD-05400 Features Clears 35" tires with up to 18" of ground clearance (XP models MUST remove the bed handle if running 35" tires) Easy 100% bolt-on, no cut, no drill installation 8" wider stance over stock track width to improve stability dramatically, improves...

Part #: RZR-08500 Features Constructed from HCR alloy (30% stronger than 4130 chromoly) Gains 2” of ground clearance Internally gusseted and braced OEM geometry & width The all-new HCR Racing Polaris RZR Turbo R OEM Replacement Kit is here. It’s engineered for serious off-road...

Features: 2” forward offset A-arms provide room for 32” tires High-clearance front A-arms Maintains OEM machine width TIG-welded by hand for strength and aesthetics Internal angled catacomb design for optimal force distribution Laser-cut construction for precise fit and finish CNC-cut chromoly mounting points for...

Part # RAN-05300-RFB-PBBHave the confidence to push your Polaris Ranger to the limits with this HCR Rear Frame Brace. The bolt on installation is a breeze. Utilizing the factory holes, only minor drilling is required to get your installation done in minutes. With the...

Part #: RS1-05300-1HCR's proprietary billet, slot and tab design and honeycomb boxed arms are built to withstand the beatings of rigorous off-road riding which achieving the optimal combination of strength and appeal. Every external weld is an internal plate structured into the design. While the cost-effective...

RZR-05310 HCR Suspension's Polaris RZR XP 1000 Heavy Duty Bolt on Back PlateFeatures:  100% Made in the USA Made with HCR Custom Material; 30% stronger than 4130 Series Chromoly  Hand Tig Welded for strength and appearance CNC bent   

Polaris RZR XP Turbo Series Dual-Sport Mid-Travel Suspension KitPart #: RZR-05710HCR Suspension has built a popular platform for the RZR XP Turbo Series with our Mid-Travel Suspension kits. These kits offer +3 inches per side and an additional wheel base of +3 inches all...

RZR-08400-1 Features Adjustable upper control arm using 3/4 inch heims to allow for control of camber & caster Constructed from HCR alloy (30% stronger than 4130 chromoly) Internally gusseted and braced Lower A-arms gain 3” of ground clearance OEM geometry & width 4130 chromoly...

Part # RZR-08400Features: Front A-arms provide an additional 3” of ground clearance Trailing arms provide an additional 2” of ground clearance Adjustable 3/4” heim joints HCR custom alloy boasts 30% more strength than chromoly TIG-welded by hand for strength and aesthetics Internal angled catacomb...

PART# RZR-08500 Features: Adjustable Upper Control Arm Using 3/4 inch Heims To Allow For Control of Camber & Caster Constructed From HCR Alloy (30% Stronger Than 4130 Chromoly) Internally Gusseted and Braced Lower A-arms Gain 3” Of Ground Clearance OEM Geometry & Width Trailing...

Polaris RZR XP 1000 Series Dual-Sport Mid-Travel Suspension Kit Part #: RZR-05700 HCR Suspension has built a popular platform for the RZR XP 1000 Series with our Mid-Travel Suspension kits. These kits offer +3 inches per side and an additional wheel base of +3...

Features: Front A-arms provide an additional 3” of ground clearance HCR custom alloy boasts 30% more strength than chromoly TIG-welded by hand for strength and aesthetics Internal angled catacomb design for optimal force distribution Laser-cut construction for precise fit and finish CNC-cut chromoly mounting...

PART# DEF-05310 FEATURES Can-Am Defender Front Forward A-Arm and Rear A-Arm Suspension Kit will add lift without adding shock brackets. Pushes front arms forward 2.5" for more clearance to run up to 35” tires, depending on the tire manufacturer Laser-cut construction for precise fit...

Part # RZR-07409 Upgrade your back plate with a true, dual-shear, weld-on option from HCR Racing. Our blended steel is 30% stronger than 4130 Chromoly. This back plate can be bolted on or welded in place, depending on your needs. Features & Benefits: Stronger...

PART# TAL-05500-RB The all new Honda Talon X radius rod brace is built to be able to take your Talon that much further. Made out of HCR's proprietary alloy steel that is 30% stronger yield and tensile strength than chromoly, it is sure to...