Features: Front axle face-to-face length: 31.02” (extended), 29.06” (compressed) Rear axle face-to-face length: 31.30” (extended), 29.29” (compressed) Made with end-to-end 4340 chromoly steel Designed with oversized CVs to operate at extreme angles 18-month warranty When it’s time to swap out broken axles on your...

PART# RZR-6300-1FEATURES Fiber Laser Cut construction for precise fit and finish CNC'd 4130 heat treated billet mounting points for increased integrity Angeles catacomb design for optimal force distribution High Clearance Boxed A-arm Design hand TIG welded for strength and aesthetics Compatible with factory wheels...

Part # RZR-07409 Upgrade your back plate with a true, dual-shear, weld-on option from HCR Racing. Our blended steel is 30% stronger than 4130 Chromoly. This back plate can be bolted on or welded in place, depending on your needs. Features & Benefits: Stronger...

Part#: MAV-06300-3Features: 3"+ high-clearance trailing arms and A-arms for easier navigation of trail obstacles Designed as an OEM, factory-width replacement for Maverick R A-arms Protects boots from damage and premature wear Uses HCR’s proprietary elite alloy material 30% stronger in yield and tensile strength than...

PART # YXZ-02400-ST Features: Additional 8 inches of track width +4 inches of wheelbase added Minimal weight increase of only 13 pounds, while increasing strength exponentially. Fiber Laser Cut construction for precise fit and finish CNC'd 4130 heat-treated billet mounting points for increased integrity...

PART# RAN-05321 Features: 2.5" forward offset front A-arms fit up to a 32” tire High-clearance front and rear A-arms at 2” of ground clearance No drilling or cutting required HCR custom alloy boasts 30% more strength than chromoly TIG-welded by hand for strength and...

PART # MAV-05407-1  HCR Can-Am Maverick X3 Trailing Arm Mud Flap Set  HCR Trailing Arm Guards are Here .. Protect those beautiful powdercoated trailing arms from getting chipped and sand blasted while on your next adventure

XP 1000 / XP Turbo / RZR XP RADIUS ROD PLATE WITH D-RING SKU: HCR-400040-11D *These are a 12mm hardware back plate and if XP is 10mm, you will have to drill out frame holes* The Polaris RZR XP 1000 Radius Rod Plate is the...

Features: Front axle face-to-face length: 29.56” (extended), 27.36” (compressed) Rear axle face-to-face length: 29.06” (extended), 26.93” (compressed) Made with end-to-end 4340 chromoly steel Designed with oversized CVs to operate at extreme angles 18-month warranty Description:Use SuperATV’s Rhino 2.0 Long Travel Axles to replace the...

Part #: RS1-05400HCR Suspension has built an aggressive platform for the RS1 Series with our MTS Suspension kit. This kits offer +3 inches per side and an additional wheel base of +3 inches all while utilizing factory shocks. This suspension kit will improve ride quality,...

Part #: RZR-05300-2 FEATURES Laser Cut construction for precise fit and finish CNC'd Chromoly mounting points for increased integrity High Clearance Boxed Front A-Arm Design 1.250 added ground clearance Each piece is Tig Welded by hand for strength and aesthetics High-Clearance Rear Trailing Arms...

Part#: MAV-05700-1 Features: American-made suspension kit designed for improved front-end stability and responsiveness. Lower shock mount reduces steering feedback for a smoother, more controlled ride. Upright front shock positioning enhances front-end stability and increases ground clearance over OEM kits. Made from HCR’s proprietary Elite...

 PART#RZR-05300-1Features: Laser Cut construction for precise fit and finish CNC'd Chromoly mounting points for increased integrity High Clearance Boxed Front A-Arm Design 1.250 added ground clearance Each piece is Tig Welded by hand for strength and aesthetics 100% Proudly Made in the U.S.A 100%...

PART # RZR-05706*PLEASE NOTE WHAT HUB HARDWARE  YOU WILL NEED - WILL BE EITHER 10MM OR 12MM*2 Lower High Clearance Link Bars2 Upper Link Bars6 5/8-18 RH Heims4 O-rings 8 Back plate end mis-alignment spacers8 Hub/wheel side mis-alignment spacersFITS : XP1000 MID TRAVEL KIT...

SKU: ZRP-400195 FITMENT:  2022 Polaris RZR Pro-R/Turbo-RThese are the best RZR tie rods on the market, bar none!Made from large diameter 7075 aluminum. Anodized Black.ZRP 17-4 Heat-treated custom machined bolts, clevis, and tapered stud.FK Rod Ends 3/4" rod end w/ ZRP misalignment spacers.ZRP 4130 Zinc-Coated LH offset sphearical...

PART# GEN-05400 Features Increases width by +5” per side (72” wide total) Wheelbase increased by +2” 1.25” of extra ground clearance from high-clearance A-arms HCR's Long-Travel General kit has been proven and tested over time and given similar design and strength properties as our...

Part #: RZR-05300 Features: 1.75" longer wheelbase for better hill climbing, descents, and improved high-speed stability High-clearance boxed front A-arms and rear trailing arms provide 1.25” of additional ground clearance Front tube mounts are 1.25” in diameter—larger than stock—with Delrin bushings for increased strength...

RZR-05310 HCR Suspension's Polaris RZR XP 1000 Heavy Duty Bolt on Back PlateFeatures:  100% Made in the USA Made with HCR Custom Material; 30% stronger than 4130 Series Chromoly  Hand Tig Welded for strength and appearance CNC bent   

PART# MAV-06300-2 Features: 3"+ high clearance for easier navigation of trail obstacles. Designed as an OEM, Factory-Width replacement for Maverick R trailing arms.  Protects boots from damage and premature wear. HCR’s Proprietary Elite Alloy Material is 30% stronger in Yield and Tensile Strength than 4130 Series...

Features: High-clearance boxed front A-arms 1.5" of added ground clearance Laser-cut construction for precise fit and finish Chromoly mounting points for increased integrity HCR custom alloy boasts 30% more strength than chromoly Strategic cutouts reduce unsprung weight by more than 10% compared to our...